Tag: Space Marines

  • Metal Mk6 Armour with Chainsword 2 Warhammer 40K Rogue Trader

    No idea who sculpted this one. Part number 070119/41. A 1991 sculpt.

  • Metal Warhammer 40K Rogue Trader Space Marine Casualty – Ex Brother Marine

    This guy was Wounded 1 or Ex Brother Marine. He’s a Bob Naismith sculpt.

  • Warhammer 40K Space Marine Metal Captain

    This chap was sculpted by Lewis Collins, apparently!

    • Undercoat: Vallejo Mecha Black
    • Blue: Scale75 Art Cobalt Blue
    • Black: Kimera Carbon Black
    • Brown on book: Kimera Oxide Brown Medium mixed with Carbon Black
    • Flesh: Kimera The White mixed with Honey Moon Yellow
    • White/grey: The White, shaded with Carbon Black
    • Purple: Kimera Purple
    • Red: Kimera The Red, mixed with Kimera’s Phthalo Green
    • Grenade: Kimera Oxide Green
  • Vintage Metal Rogue Trader Contemptor Class Dreadnought

    Vintage Metal Rogue Trader Contemptor Class Dreadnought

    This is the Contemptor Class Close Combat Dreadnought who goes by Chuck in the catalogues! He’s an old Rogue Trader metal mini.

    • Undercoat: Vallejo Mecha Black
    • Blue: Scale75 Art Cobalt Blue, highlighted with Kimera The White, shaded with Kimera Carbon Black
    • Red: Kimera The Red, highlighted with Kimera’s Cold Yellow, shaded with Carbon Black
    • White: Kimera’s The White
    • Silver: Black Metal, then Thrash Metal, highlight of Speed Metal, shaded with Carbon Black
    • Cape: Stolen from the HH Sword Praetor.

    Here he is next to a new Terminator:

  • Vintage Games Workshop C100 Space Marine Firing aka Bolter 7 070121 45

    This is one of the eight original Space Marines from the C100 Space Marine Mega Shock Squad, as shown in 1986. In the 1991 catalogues he was shown as Bolter 7, part number 070121/45.

    He’s a Bob Naismith sculpt.

    This guy has got a scenic base, which I think is pretty cool! Sadly it had to get removed so I could strip him.

  • Metal Rogue Trader Space Marine Jet Cycle Mk 14 Bullock Vintage Games Workshop Miniature

    This is the Mark 14 Bullock Jet Cycle – or Jet Bike – as shown in the December 1987 issue of White Dwarf (#96). The model design was accredited to “Citadel designer and full-time Scottish person Bob “mince ‘n tatties” Naismith”.

    “Johan Blank” wrote up a piece on it:

    0852640.M41 Tester’s Comments.

    Geno-Sensor – vast improvement over Mk13; the sensor picked up my print and fired the engine as soon as I touched the seat. Better than the old retinal identification system – since the Mk12 burned an eye out, I’m glad to see the back of it.

    Body-config – good; the extra hydraulics in the steering gear bring the whole instrument panel into reach from either hand.

    Gravitic drive is fast and functional – no feel compared to the wheelies but lots quicker. Bit more shove than the old model so I was glad of those hug-seats when stacking the Gs. See attached spec sheet for in-flight recorded profile. The standard full-throttle maximum burn and overheat tests showed a definite weakness in the front exhaust manifolds. As this was the Mk14’s first red-run, this was to be expected. Suggest we move the first couple of exhaust bars under the machine and well clear of the rider’s right leg. I couldn’t reach the emergency medi-kit on the prototype model – but the doc says they can graft a new leg on and I’ll be back on the road sometime next week.

    The twin bolters performed well. The new feed belts definitely need some work as the destruction test blew out far too early. The extra speed of the Mk14 is too much for the old deflectors – I caught almost four grams of shrap in the left lung, mostly from the shattered shielding. Doc’s got me in the cybron-gill – but he’s promised me something better soon. I haven’t seen the specs on the full-speed collision test. I’ll give them a good going over when the bandages come off. Doc says I’ll have a job focussing with the new eyes but they’re rigging up some temporary auto-sense right now. The new front hydraulics definitely need beefing up a bit – them pistons are there to save your bones not pulp your whole chest cavity.

    Summary. Fine piece of metal. A vast improvement on the Mk13. More chrome please.

    Johan Blank

    The rules back then stated that it could hover as well as fly at speed. Of note; “The Mk13 is already in service with the Army and, in modified forms, with many Marine chapters.”

    Of further note – “Various weapon combinations have been ear-marked for testing with the Mk14. The standard combined twin-bolter assembly will be fitted to most machines. Many Marine Chapters favour a heavier supporting armament as part of their recon squad, usually on the basis of 1 bike in 5.”

    Equipment consisted of a built-in auto-drive, with optional bio-scanner, energy scanner, communicator or auto-aim (controlling the twinned bolters, or main armament). Exact specification can be changed depending on the circumstances: most equipment simply bolts on.

    The metal body was designed to accomodate the plastic Marines of the time.

    There’s a reasonably extensive section on the Raven Wing’s ten squads and their use of jet cycles and five different configurations were suggested. More of an update on that another time.

  • 1991 Limited Edition Games Day Space Marine Captain LE4

    This metal sculpt was a limited edition given out at a Games Day – the base says 1991. Apparently it was a Jes Goodwin sculpt.

    So many skulls! All over the cloak too:

    I think he nicked the sword/scabbard from the original Terminator sergeant.

  • Web Exclusive Space Marine Sergeant with Power Fist – Metal

    Found this guy for my nostalgia force – he’s a bit more ornate than the Captain with Terminator Honours, though, which may necessitate a re-think as to who’s who. We’ll see. Painting to come…

    This guy was released alongside Games Workshop’s new website back in 2008, as far as I’m aware.

    Always feels weird opening a box from years ago – like you’re doing something you shouldn’t be.