Angry Griffin's Oldhammer

Category: Paint Schemes

  • Dark Watcher by Reaper Miniatures – Paint Scheme

    Dark Watcher by Reaper Miniatures – Paint Scheme

    Loosely inspired by the Spectator from Baldur’s Gate 2.

    • Undercoat: Vallejo Mecha Black
    • Red: Kimera The Red, shaded with Slaughter Red, dot highlights of Scale75 white ink, then Kimera Cold Yellow, then the lot washed with Magmadroth Flame with the occasional bit of Berserker Bloodshade mixed in. Tongue was drybrushed with The White and washed with Baal Red contrast with a shade of Sigvald Burgundy. Shade of Targor Rageshade in the non-circular skin bumps.
    • Green: Kimera Phthalo Green, then drybrushed with The White mixed with that, then a wash of Shamrock Green from Army Painter followed by a wash of Orc Skin in the recesses.
    • Bone: The White fofllowed by Bony Matter. Teeth then had Mortarion Grime all over them with a little bit of Targor Rageshade for between the teeth.
    • Base: Moss Green Soilworks then Mars followed by Gypsum on the rocks, with a little bit of Ash mixed in in patches.

  • Monopose 2nd. Edition Space Marine – Painted as an Ultramarine

    I am painting a 2nd. Edition monopose marine for Darren Latham’s 90s Marine challenge.

    Paints used so far:

    • Undercoat: Vallejo Mecha Black
    • Blue: Scale75 Art Cobalt Blue, shaded with Permanent Orange. Highlighted with The White or Scale Artist White Ink. Further shading with Carbon Black.
    • Yellow: Kimera The White followed by Cold Yellow, shaded with a blend of Cold Yellow and Scale75 Artist Magenta SART-23. Warmed up a little with Kimera’s Warm Yellow. Highlights of White Ink then Yellow Ink SART-73.
    • Red: Kimera’s The Red mixed with Cobalt Bluegreen, followed by The Red mixed with Cold Yellow. Further layering of Toluidine Red mixed with Phthalo Green, then glazed with The Red. Highlights of Warm Yellow followed by The White.
    • Leather: Kimera Oxide Brown Light, shaded with Cobalt Blue. A confused mix of blends after that.
    • Base: Goblin Green, highlighted with a drybrush of The White, glazed with Yellow Ink, overall glaze with Goblin Green again to knock it back a little
    • Bone colour: Scale75 Off White mixed with The White. Shaded with Kimera Oxide Brown Dark. Highlight of The White.
    • Ammo: Carbon Black, highlighted with The White, wash of Yellow Ink, further wash of Chestnut Ink, highlight of The White
    • Ammo: Decayed Metal, Victorian Brass, Moonstone Alchemy then a wash of Chestnut Ink, then another highlight of Moonstone Alchemy.
    • Lenses: Spring Green, with a highlight of Yellow Ink, further highlight of White Ink, shaded with Carbon Black, highlight of The White
    • Silver: Black Metal, then Thrash Metal, then Speed Metal, then White Alchemy, then Nuln Oil Gloss, then some Carbon Black to knock back the gloss a little (no regular Nuln), then Speed Metal and White Alchemy again to bring the highlights back.

  • Star Wars Shatterpoint – Painting the 501st Clone Troopers

    This is a new one to me – painting a plastic mini so large and so not heroic scale! This is one of the Clone Troopers from the Shatterpoint box set.

    • Undercoat: Vallejo Mecha Black
    • White/Grey/Black: Kimera Carbon Black, The White and the two mixed
    • Blue: Scale75 Art Cobalt, shaded with Carbon Black, highlighted with The White
    • Orange: Scale75 Artist White Ink, Orange Ink and Yellow Ink
    • Rim: Vallejo Model Colour Black Grey
    • Base: Soilworks Reddish Brown, Natural Soil then Gypsum for the rocks

  • Leviathan 10th Edition Terminator Ultramarines Colour Scheme

    • Undercoat: Vallejo Mecha Black
    • Blue: Scale75 Art Cobalt Blue, shaded with Kimera Carbon Black, highlighted with Kimera The White
    • Red: Kimera The Red
    • Silver: Scale75 Black Metal, shaded with their current black ink
    • Gold: Necro Gold, shaded with black ink, drybrush of Elven Gold then Citrine Alchemy, edge highlight of Citrine Alchemy
    • White: The White
    • Lenses: Scale75 Spring Green, highlighted with Kimera Cold Yellow, shaded with Carbon Black

    Next to an old Contemptor for kicks:

  • Wargaming Scatter Terrain Plasma Generator Paint Scheme PLAS002

    This is the paint scheme I used for one of our STLs!

    Undercoat: Vallejo Mecha Black

    Base: Turquoise and Turquoise Blue, then sponge on Black Metal, then Thrash Metal. Liberal wash of Nuln

    Plasma: Art Black, then Stuart Semple’s glow in the dark pigment – in this instance pink, believe it or not. Looks pink until it’s charged then it glows green.

    Weathering: Scale75 Floww Turquoise Blue mixed with Titanium White, then a brush was dragged downwards through it with Scale75’s odourless thinners on it.

  • Dirty Down Rust over a metallic base

    This is undiluted Dirty Down rust roughly applied with a cheap brush onto a Necromunda base which had been prepped with a mid silver, drybrushed over with a light silver (in this instance Heavy Metal brushed over with Speed Metal):

  • Garaghak’s Sewer contrast over a metallic paint

    Testing out the new Garaghak’s Sewer contrast paint over a metallic paint, drybrushed with a lighter metallic (in this instance Heavy Metal brushed over with Speed Metal). Starting base:

    End result, undiluted and heavily applied with a cheap brush:

  • Citadel or Games Workshop Goblin Green modern paint colour alternatives

    I managed to find an old pot of Goblin Green which is full and still liquid – time to try colour matching some modern colours to it to see what makes for a good alternative.

    Experiments to come!

  • Paint scheme: Wood… again

    Playing around with a new wood STL!

     

     

    Undercoat: Scale75 Surface Primer Sand

    Base Coat: Mournfang Brown

    Boards: Alternately Wyldwood, Snakebite Leather, Guilliman Flesh, drybrush Mournfang Brown, selective wash of Agrax Earthshade

    Pigment: Scale75 Dark Earth

  • Stone Town Kickstarter Painting Update #4

    This one was super quick:

    Stone:

    Undercoat: Vallejo Mecha Black

    Base Coat: Citadel Morghast Bone

    Pigment: Scale75 Soilworks Dark Earth SPG-10

    That’s it. It’s a very speedy way of getting something tabletop ready in short order.

    The door was painted with the same colours as the gangway. Speaking of the gangway: